Since the Camaro's reintroduction a year ago many companies have had their crack at topping the SS (some even with a full warranty), but at long last it was GM's turn. And the General did not let us down. As GM's Ed Welburn and Rick Scheidt said when the 2012 ZL1 was unveiled, this is the most technologically advanced Camaro ever built, perhaps why only the ZL1 nameplate was sufficient for describing it. While it doesn't utilize an all-aluminum 427 big-block, or even its late model cousin-the LS7-it does have the most powerful engine ever dropped onto an F-body chassis at a GM assembly plant. The 550-horse 6.2L supercharged LSA engine is also one of the most meticulously designed and built factory engines, which lends itself to a high degree of durability and function. It's clear GM has set its sights on not just the Ford GT500 or even the Dodge Challenger SRT8, but on every sports car ever made or not made.
Starting first with the LSA's 3197T7 aluminum block, GM has a number of tricks up its sleeves. The cast-in-place (cast iron) cylinder liners receive deck plate honing, as you would on a high-end engine build at a custom shop, using billet aluminum plates and factory head bolts (torqued to spec) to simulate bore distortion. This process prevents scuffing by the pistons against the cylinder wall, and a more true bore means better sealing by the rings, which ultimately means more power, less friction and greater durability. GM started this on the LS7 and LS9 production and has been carried over to the LSA, where the final hone brings the cylinders to within 8 microns (.00031 inch) of its 103.25mm (4.06-inch) bore. Added to this precisely machined block are piston oil squirters, which will further aid to the longevity of the motor in helping to cool the low compression, high-strength alloy cast (hypereutectic) pistons. A forged crankshaft mated to lightweight powdered metal connecting rods gives thrust to the wet-sump LSA, and is lubricated by a special highvolume oil pump that has a pan-mounted cooler from which to draw its supply.
When combined with the L92-based heads, the LSA has a boost-friendly 9.1:1 compression. However, unlike its more cookie-cutter cousin, the LSA heads are a high-strength casting made of A356T6 alloy, for greater heat resistance, manufactured using the roto-casting method (like the LS9 heads) to virtually eliminate porosity. Premium steel 2.16-inch intake and 1.59 exhaust valves are used, and actuated by a low-lift (.480-inch) cam for smooth idle and low RPM characteristics. Unique 4-layer steel head gaskets are used so that the LSA can take all that the 1.9L Eaton can dish out. Many are already familiar with the sixth-generation, four-lobe blower from Eaton that is quieter and more efficient than ever thanks to its Twin Vortices Series (TVS) design. On the ZL1 it cranks out 9.0psi after passing thru its top-mounted liquid-to-air charge cooler. The cooler uses a dedicated circuit with a remote pump and reservoir instead of tapping the radiator. Exhaust is handled by a set of cast stainless steel manifolds, and a dual mode muffler setup similar to the corvette.
Of course 550 ft-lbs of torque means the ZL1 requires a substantial drivetrain, and GM was quick to point out its advancements in this area including a 240mm dual-disc clutch, mated to a dual-mass flywheel and Tremec's stronger version of the TR6060 [aka "MG9"]. To better interact with the LSA's low RPM torque, the Z06 gear set was used in the 6060 as opposed to the more steep SS gears. The possibility of an automatic trans option, such as the 6L90E, hasn't been ruled out and appears under heavy consideration moving forward. Whether it makes production for the '12 model will remain to be seen. While specifics weren't given on the rear axle assembly, it was said to be a larger and stronger cast iron housing with stronger, asymmetrical axles. The axle design has been patented, and GM says it will negate wheel hop to the point of eliminating "torque-limiting electronics" (aka torque management). Other upgrades to the rear include a stronger limited-slip differential as well as a 3.73 gear ratio. GM denies that the housing uses the 9.5-inch ring and pinion, commonly found in GM trucks, but also said that it was in fact larger than the SS's 8.5-inch unit.
The suspension and chassis are just as advanced as the powertrain, boasting electric power steering, for enhanced feedback and more precise control, as well as Magnetic Ride Control. Much like the Corvette's, the ZL1's Magnetic Ride uses magneto-rheological science to vary shock dampening to optimize for either everyday street driving (Tour) or more spirited efforts (Sport). The rear sway bar (or stabilizer bar) has also been altered from the base and SS models, moving the drop links outboard of the control arms. GM says this provides more crisp response to driver commands, and can more effectively control body roll given the ZL1's increased limits. The spring rates and sway bar specs have been revised as well, though exact numbers can't be given as it may be subject to change as GM continues to the test the ZL1 on a variety of locations and surfaces. [At publication GM said they were closing in on the 80 percent mark of development and testing, with production slated for "early 2012."] Thankfully the increase in both unsprung and sprung mass is met with larger Brembo 14.6-inch, 6-piston front and 14.4-inch, 4-piston rear brakes (akin to the CTS-V). A newly designed forged 20-inch wheel saves weight while allowing more width for a meatier set of tires from Goodyear, which were specially designed for the ZL1 and based off the second-generation F1 Supercar tread and compound.
Unfortunately as advanced as the ZL1 is, it is still basically a Camaro, so GM says that it will not differ dramatically in terms of its physical footprint. However, throughout the design process weight has been cut where possible (to help offset the added powertrain mass), such as the forged wheels and aluminum hood, which has a carbon-fiber center section. The hood also has air extractors built into it that works with the front splitter and rear diffuser to move air precisely around the car. Quite a bit of work has been done in the wind tunnel with the ZL1, and we look forward to seeing some data on its aerodynamics. Also built into its sleek shape and redesigned front fascia is a set of brake cooling ducts as well as HID headlamps and foglamps. Though the final curbweight has not been determined, it is said that the balance will be near 52-percent front and 48-pecent rear.
All of the Camaro exterior colors will be available on the ZL1 (with the black section on the hood), however the interior will only come in black. Microfiber suede will be used throughout the interior, as inserts on the seats and as an accent on the instrument panel. In addition to standard fair on the 2SS package, the ZL1 receives six-way power front seats, "ZL1" sill plates, unique instrument panel and door inserts, steering wheel audio controls with Bluetooth capability, wireless PDIM and USB port, Boston Acoustics premium sound system, rear parking assist, and a rear camera system displayed in the rearview mirror. These technical gadgets add to the ZL1's long and impressive list, which is why Rick Scheidt, vice president of Chevrolet marketing, said "the Camaro ZL1 is about high-tech performance and design, and is a type of car no one has ever brought to this segment previously." Performance, comfort, and gadgetry abound, the ZL1 looks to be a top player in the market. We can't wait for our test drive.
Unique components to the ZL1's LSA (versus the Cadillac CTS-V's):
-Black intercooler housing with unique heat exchanger and plumbing to accommodate the Camaro engine compartment
-Cast stainless steel exhaust manifolds for enhanced thermal management
-Camaro-specific oil pan
-Revised accessory drive with unique alternator and air conditioning compressor
-Idler pulley in place of the conventional power steering pump pulley, because of the use of electric power steering
-Special engine cover in red.
Engine: LSA supercharged 6.2L pushrod V-8, 16 valves, 9.1:1 compression, aluminum block and heads, wet sump, center-feed port fuel injection
Horsepower: 550 at 6100rpm
Torque: 550 at 3800rpm
Transmission: Tremec TR6060 6-speed manual (2.66, 1.78, 1.30, 1.00, .80, .63:1 ratios)
Rear End: heavy-duty cast iron housing, 3.73:1 gear ratio, limited-slip differential
Chassis: unitized body frame, one- and two-sided galvanized steel
Front Suspension: double ball joint, multi-link strut; direct-acting stabilizer bar; progressive-rate coil springs; with Magnetic Ride Control
Rear Suspension: 4.5-link independent; progressive-rate coil springs over shocks; stabilizer bar; with Magnetic Ride Control
Steering: electric power steering with variable-ratio, variable-effort rack-and-pinion; 16.1:1 ratio; 2.5 turns lock-to-lock
Brakes: ventilated two-piece 14.6-inch front, one-piece 14.4-inch rear rotors; six-piston fixed Brembo aluminum front, four-piston rear calipers; with ABS
Wheels: forged 20x10 front, 20x11 rear
Tires: Goodyear Eagle F1 Supercar G:2 P285/35ZR20 front, P305/35ZR20 rear
Chevrolet officially confirmed return of the 1LE package with the 2013 Camaro. The 1Le offers something in between the high-performance ZL1 and the more day to day SS. It will have 426-hp, benefits from the ZL1 chassis and suspension, and will have a price tag of under $40,000. It also features a unique design, distinguishing it from both aforementioned models. The 1LE is the track-ready version of the Camaro.
Camaro 1LE is based only on the 1SS and 2SS coupe models, featuring a 6.2L LS3 V-8, which is rated at 426 horsepower (318 kW) and 420 lb-ft of torque (569 Nm), and only comes with six-speed manual gearbox. It is, after all, for the racing enthusiasts.
On the outside, the 1LE package features matte-black hood, front splitter and rear spoiler – as well as the 10-spoke ZL1-based wheels finished in black. The new aero parts no only look cool, they have a aerodynamic function as well. Inside the cabin, the 1LE comes with the ZL1’s flat-bottom steering wheel, trimmed in sueded-microfiber and designed for easier heel-and-toe driving on the racetrack, and ZL1′s gear lever.
All 2013 Camaro SS models will get the electric power steering system developed for the ZL1, and optional dual-mode exhaust system. What’s more Chevrolet’s color touch radio with MyLink infotainment is available on all 2013 Camaro LT, SS and ZL1 models. The color touch radio, with a 7-inch touch screen, also can be paired with an available in-dash GPS navigationsystem – a first for the Camaro.
Other changes to optimize the 1LE for track-day use include: